How to Frame a Canvas Print with an Oak Frame
By Wall of Art | Published: 2026-10-19
Category: How-to Guides
Learn how to frame your canvas print using a floating oak frame. This step-by-step guide covers preparation, assembly, and common mistakes to avoid.
Quick answer
Framing a canvas print with a floating oak frame gives your artwork a clean, gallery-like finish. The process is straightforward: measure your canvas, prepare the frame, insert the canvas, and secure it from behind.
Why choose a floating oak frame
A floating frame creates a small gap between the canvas and the frame, making the artwork appear to hover. This effect adds depth and a modern, polished look. The Canvas oak frame from Wall of Art is FSC® certified and crafted within the EU, so you get a sustainable product with consistent quality.
Step-by-step framing guide
- Measure your canvas: Measure the exact width and height of your canvas print. Floating frames require precise sizing so the canvas sits snugly inside. Write down the dimensions before ordering or cutting the frame. A common mistake is ordering a frame that matches the paper size rather than the stretched canvas size. Always measure the canvas itself.
- Prepare the frame: Lay the oak frame pieces on a flat, clean surface. For the Canvas oak frame, you typically receive four separate pieces. Arrange them in the correct orientation — the inner lip should face inward to hold the canvas. Check that the frame pieces are oriented the same way before assembly. A reversed piece will leave a visible gap.
- Insert the canvas: Place the canvas print face down on a soft cloth. Position the frame pieces around the canvas so the inner lip overlaps the canvas edge. The canvas should sit evenly inside the frame without forcing it. If the canvas is too tight, do not push it in — you may damage the frame or the canvas. Check your measurements again.
- Secure the frame: Attach the frame corners using the provided brackets or screws (depending on the frame design). Tighten them gently — overtightening can crack the wood. Ensure all corners are flush. Use a screwdriver with a comfortable grip. Hand-tighten first, then check alignment before final tightening.
- Attach hanging hardware: Install D-rings or a sawtooth hanger on the back of the frame. Center the hardware so the canvas hangs straight. Measure from the top of the frame to the hardware for accurate wall placement. A common mistake is placing hardware off-center. Use a level and measure twice before drilling into the wall.
Product used in this guide
- Canvas oak frame: FSC® certified and carefully crafted within the EU. You get a sustainably sourced frame with reliable craftsmanship, so your canvas is protected and looks great for years.

Canvas oak frame
