How to Install a Soundscape Panel for Maximum Acoustic Benefit
By Wall of Art | Published: 2026-10-21
Category: How-to Guides
Learn where to place and how to install a Soundscape panel for the best echo reduction and acoustic performance in any room.
Quick Answer
To get the most acoustic benefit from a Soundscape panel, install it at ear height on the wall where sound first reflects—typically the wall facing your main listening or speaking position.
Why Placement Matters More Than the Panel Itself
A Soundscape panel absorbs sound, but its effectiveness depends on where you put it. Sound waves reflect off hard surfaces, so the panel must interrupt the first reflection path to reduce echo noticeably.
Placing a panel behind you when the sound source is in front is a common mistake. The panel should sit between the sound source and the listener, on the wall where sound hits first.
The type of room also matters. In an office or restaurant, the priority is often speech clarity, so panels near seating or dining areas work best. In a home, placing panels at ear height in the main living area gives the most noticeable improvement.
Trade-offs: Coverage vs. Aesthetics
More coverage means better sound absorption, but you don't need to cover every wall. A few well-placed panels can make a significant difference without turning your room into a studio.
Soundscape panels double as art, so you can balance acoustic performance with visual appeal. Choose a design that complements your space, like the Format Figure or Flower bath prints, to get both function and style.
Remember that panels work best when spaced evenly rather than clustered in one corner. Distribute them across the wall to catch reflections from different angles.
Step-by-Step Installation for Best Acoustic Results
- Identify the reflection point: Sit or stand where you usually listen or speak. Have someone move a mirror along the wall until you can see the sound source (like a speaker or TV) in the mirror. That spot is the first reflection point. Check both side walls and the back wall—each has a reflection point.
- Mark the mounting height: Position the panel so its center is at ear height when you're seated or standing, depending on the room's primary use. Use a pencil to mark the top corners lightly. For a room used both seated and standing, aim for the average ear height of the main users.
- Install the mounting hardware: Soundscape panels typically come with mounting hardware. Use a stud finder to locate wall studs; if none align with your marks, use appropriate wall anchors for your wall type (drywall, plaster, etc.). Always check the panel's weight and use hardware rated for at least that much.
- Hang the panel and level it: Lift the panel onto the hardware, then use a spirit level to ensure it's straight. Adjust if needed before pressing it fully into place. A crooked panel draws the eye and can reduce the perceived quality of the installation.
- Test the acoustic effect: Clap your hands or play music in the room. Walk around to hear the difference. If echo persists, consider adding another panel on the opposite wall or at a second reflection point. One panel helps, but two or more placed at different reflection points give the best overall sound improvement.
Soundscape Panels That Combine Art and Acoustics
- Ljudabsorbent ljus Ekram - Format Figure: This Soundscape panel features the Format Figure motif by artist Lucrecia Rey Caro, framed in a light oak frame. It absorbs sound while adding a contemporary art piece, making it ideal for living rooms or offices where aesthetics matter.
Ljudabsorbent ljus Ekram - Format Figure - Ljudabsorbent ljus Ekram - Nexus Pink: The Nexus Pink panel by artist Lena Wigers is available in a light oak frame and is designed for spaces like offices, restaurants, and hotels. Its pink abstract design can soften a room's look while helping to control echo, perfect for hospitality or creative workspaces.
Ljudabsorbent ljus Ekram - Nexus Pink
